other

MEMS VOA 可调衰减器

Product Features


  • Low insertion loss
  • Low polarization dependent
  • Compact size
  • Available in both normally open and normally closed states
  • Excellent reliability



Product Application


  • Power Management
  • Receiver protective
  • Channel Balance
  • Instrumentation



  • 产品详细信息

MEMS Variable Optical Attenuator (Mems VOAs)


Mirror MEMS attenuators (MEMS VOAs) are based on a micro-electro-mechanical system (MEMS) technology. The MEMS attenuators design achieves highly repeatable optical attenuation over C and/or L band through an electrically movable mirror on silicon.


Specifications


Parameters

Unit

Specifications

Wavelength Range

nm

850±40 / 1310±40

TestWavelength

nm

850 /1310

Attenuation Type

 

Bright / Dark

Insertion Loss 1, 2

dB

≤ 1.2

Attenuation Range3

dB

20/30/40

Attenuation Resolution

dB

Continuous

Return Loss

dB

≥ 30

TDL

dB

@0~10dB≤1.0

@10~20dB≤ 2.0

Repeatability 

dB

≤ 0.1

Operating Voltage

V

≤ 9

Durability

Cycles

≥ 109

Response Time

ms

≤ 5

Optical Power

mW

≤ 500

Operating Temperature

-5~ +75

Storage Temperature

-40 ~ +85

Relative Humidity

%

5 ~ 95

Dimension

mm

(Φ)5.5x(L)19±0.2

Note:   


  1. Room temperature,Excluding connectors, add 0.2dB one pair connectors.
  2.  For dark type, the voltage is 9V with 0dB attenuation.
  3. The voltage is 9v for the attenuation arrange.


 

MECHANICAL DRAWINGS

MEMS Variable Optical Attenuator (Mems VOAs)


MEMS Variable Optical Attenuator (Mems VOAs)


Ordering Information

FW-MM VOA-A-B-C-D-E-F

A

B

C

D

E

F

Attenuation w/o voltage

Fiber Type

TestWavelength

Tube Type

Fiber Length

Connector

BR:

Bright

DK:

Dark

M5:

MM, 50/125

M6:

MM, 62.5/125

X:

Others

850:

850nm

1310:

1310nm

X:

Others

25:

250um

90:

900um

X:

Others

05:

0.5m±5cm

10:

1.0m±5cm

X:

Others

OO:None

FP:FC/PC

FA:FC/APC

SP:SC/PC

SA:SC/APC

LP:LC/PC

LA:LC/APC

X:Others

想知道这个产品吗?

发送 信息
留言

如果您对我们的产品感兴趣并想了解更多详细信息,请在此处留言,我们将尽快答复您。

相关产品
MEMS Fiber Optical Switch MXN MEMS 光开关
Features Proven MEMS durability and reliability Compact Form Factor TTL UART interface Qualified to Telcordia GR-1073-CORE and RoHS Applications Optical path selection AsAutomatic optical distribution rack
MEMS Fiber Optical Switch 1XN MEMS 光开关
Features Proven MEMS durability and reliability Compact Form Factor Fast switching time Qualified to Telcordia GR-1073-CORE and RoHS Applications Opticalsignal switching androuting Optical network protection and restoration Optical path monitoring (Workingwith OTDR or OCM) Instrumentation resource sharing
管理型交换机 2光8电千兆管理型POE交换机 FWPS2008G
8*10/100/1000Mbps RJ45端口+2*千兆SFP端口 FWPS2008G是一款全千兆网管型PoE交换机,能满足WIFI AP、IP-camera、WIFI网桥、IP电话等多种类型的设备PoE供电需求。产品采用新一代高性能硬件和软件平台,提供灵活、高性价比的全千兆接入和上行端口,支持三层路由协议、完备的安全防护机制、完善的ACL/QoS策略和丰富的VLAN功能,易于管理维护,满足用户对于网络设备易管理、高安全、低成本的组网需求,适用于校园、酒店及企业园区网络接入、汇聚、核心多种应用场景。
工业级交换机 2光4电POE千兆工业级交换机 FW304GPS-2F
4*10/100/1000M自适应RJ45端口+2*千兆SFP端口(上行) FW304GPS-2F是一款准工业全千兆管理型POE交换机,提供4个千兆POE端口,2个千兆光口,全端口支持6KV防雷保护,支持电源过温保护、过压保护,浪涌电流保护等多种 保护特性。支持IEEE 802.3x 全双⼯流控和半双⼯backpressure流控。符合IEEE802.3af&at标准,单端口最大PoE功率为30W。高可靠性防护等级,适应各种复杂环境,48-56V DC冗余双电源电压输入,支持直流电源双路冗余供电或双路直流/交流冗余供电,满足不同供电环境中的电力所需。
Dual Fiber 8CH CWDM MUX DEMUX 8路 双纤双向 1470nm~1610nm CWDM 带1310nm及监控口 波分复用设备
CWDM MUX DEMUX,Multiplexing up to 8 Channels on Dual Fiber Monitor Port for Troubleshooting, 1310nm Port for Legacy Traffic Passive, Protocol Transparent for Ethernet, FC, OTN, SONET/SDH, etc. Fully Compatible with All ITU-T 1G/10G/25G CWDM Optics Applied to Metro, Regional CWDM Networks
OTDR 1625nm Filter OTDR 1625nm FWDM 滤波器件
Single channel 3 port 1625nm OTDR filter, works in OTDR system Low insertion loss High channel isolation Low polarization dependent loss Exceptional reliability and stability
1.25G 1550nm 200KM DDM SFP 光模块 1.25G 1550nm 200KM DDM SFP 光模块
1.25G SFP optical transceiver module, support 1.25Gb/s 200 km transmission, It works in high-speed IDC connection solutions, network switch, PTN, OTN and so on. Features: Up to 1.25Gb/s Data Links Hot-Pluggable Duplex LC connector Up to200km on9/125μmSMF 1550nmCOOLED DFBlaser transmitter APD Receiver Single +3.3V Power Supply Monitoring Interface Compliant with SFF-8472 Maximum Power<1.5W Operating temperature range: Commercial: 0°C to 70°C, Industrial: -40°C to +85°C RoHS compliant and Lead Free Applications: Metro/Access Networks 1.25 Gb/s 1000Base-EZX Ethernet 1×Fibre Channel Other Optical Links
100G CFP转QSFP28转换模块 100G CFP转QSFP28转换模块 带FEC
Features CAUI -10 Electrical Interface:10 Lanes @10Gbit/s for CFP port CAUI -4 Electrical Interface:4 Lanes @25.78Gbit/s for QSFP28 port Hot Pluggable Low latency FEC MDIO, I2C Support Compliant to CFP MSA Case operating temperature: 0 to 70 °C The RQ-CFP-QSFP28-F Adaptor Module converts a 100 Gigabit CFP port into a 100 Gigabit QSFP28 port. With the Adaptor Module, customers have the flexibility to use the 100 Gigabit CFP interface port of a switch with CFP modules or QSFP28 modules. For 100G Ethernet, reference clock can switch 161.133mhz or 644.531mhz; For OUT 4, reference clock can switch 174.703mhz or 698.812mhz; Users can control whether FEC function is enabled or not through register configuration.
留言
留言
如果您对我们的产品感兴趣并想了解更多详细信息,请在此处留言,我们将尽快答复您。

首页

产品

关于

联系